Avocent Access Router Cyclades-PR2000 Manuel d'utilisateur télécharger pdf (Page 80)

Cyclades-PR2000

Chapter 9 - Routing Protocols 80

CONFIG=>IP=>BGP4=>NEIGHBOR=>ADD (continued)

Keepalive Interval between keepalive messages sent to this neighbor.

Connection Retry

Time

When a connection with this neighbor is broken, the router try to reconnect with

frequency 1 divided by the Connection Retry Time.

Start Time Time delay before router tries to connect

Incoming Distribution

Access List Name

Applies a distribution access list to update messages received from this neighbor.

Outgoing Distribute

Access List Name

Applies a distribution access list to update messages sent to this neighbor.

Incoming Filter

Access List Name

Applies a filter access list to update messages received from this neighbor.

Outgoing Filter

Access List Name

Applies a filter access list to update messages sent to this neighbor.

Incoming Community

Access List Name

Applies a filter access list to update messages received from this neighbor.

Outgoing Community

Access List Name

Applies a filter access list to update messages sent to this neighbor.

Incoming Route Map

Number

Applies a route map to update messages received from this neighbor.

Outgoing Route Map

Number

Applies a route map to update messages sent to this neighbor.

Neighbor Alias

Address

Additional address used by the other router.

STEP THREE

Figure 9.5 shows an example of a route that could be filtered out. The preferred route from 5 to 1 is through 4, with

6 serving as a reliable backup. Any route received from neighbor 2 which includes 5 will probably be a duplicate

of the equivalent route received from 4. In order to reduce the size of the routing table, all routes received from 2

than contain 5 can be filtered out of incoming update messages.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 135 136

Pas de commentaire

Avocent Access Router Cyclades-PR2000 Manuel d'utilisateur Page 80