Avocent Access Router Cyclades-PR2000 Manuel d'utilisateur télécharger pdf (Page 22)

Cyclades-PR2000

22Chapter 4 - Step-by-Step Instructions

CONFIG=>INTERFACE=>SWAN=>NETWORK PROTOCOL=>IP

Parameter Example Your Application

Active or Inactive Active enables IP communication (IPX and

Transparent Bridge are not used in this

example).

Interface Unnumbered/

Numbered

Primary IP Address 0.0.0.0 (This number will be assigned by the

Access Provider dynamically.)

Subnet Mask 255.0.0.0

Secondary IP Address 0.0.0.0 for none

IP MTU Use the preset value, 1500. This determines

whether or not a given IP datagram is

fragmented.

NAT

Global Assigned

because the IP address of

the SWAN interface will be assigned

dynamically.

Enable Dynamic Local IP

Address

Yes, because the IP address of the SWAN

interface will be assigned dynamically.

Remote IP Address Type Any

Remote IP Address 0.0.0.0

ICMP Port Inactive

Incoming Rule List Name None, filters are not included in this example.

Outgoing Rule List Name None, filters are not included in this example.

Routing of Broadcast

Messages

Inactive

FIGURE 4.4 SWAN NETWORK PROTOCOL (IP) MENU PARAMETERS

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 135 136

Pas de commentaire

Avocent Access Router Cyclades-PR2000 Manuel d'utilisateur Page 22