Avocent ECMS2000U Guide de l'utilisateur télécharger pdf (Page 55)

Chapter 3: Operations 49

Restoring Factory Default Settings

The serial menu enables you to easily restore the factory default settings of both the ECMS user

station and the transmitter.

NOTE: Restoring factory default settings will also reset network settings. Before restoring factory default

settings, assess whether this is likely to cause conflicts with other devices on the network.

To restore the ECMS user station or transmitter factory default settings:

1. Press Enter to display the serial menu.

2. Press 1 to access the Receiver Main Menu or press 2 to access the Transmitter Main Menu and

press Enter. If the password option is enabled, you will be prompted for a password.

3. Type the password and press Enter. The Receiver or Transmitter Main Menu will appear.

4. Press 4 to access the Restore Factory Defaults menu and press Enter.

5. Defaults will now automatically reset. You will be automatically returned to the Appliance

Selection Menu.

6. During reset, the ECMS user station will drop the connection to the transmitter. When reset is

complete, the ECMS user station will restore the connection to the transmitter using the new

settings.

Resetting the Emerge Digital Extender System

To reset the ECMS user station:

1. Press Enter to display the serial menu.

2. Press 1 to access the Receiver Main Menu and press Enter. If the password option is enabled,

you will be prompted for a password.

3. The Receiver Main Menu will appear.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 91 92

Pas de commentaire

Avocent ECMS2000U Guide de l'utilisateur Page 55