Avocent ECMS2000U Guide de l'utilisateur télécharger pdf (Page 53)

Chapter 3: Operations 47

7. Enter the URL for the upgrade file using the following syntax:

http://<server ip address>[:server port]/<upgrade file path>

For example:

http://192.168.13.3:8080/TX.dld

NOTE: If the server is set up on standard port 80, the port information can be omitted.

8. To initiate the file transfer, press Enter. The connection to the transmitter will be dropped.

9. When the transfer has completed, a message will display stating Firmware update successful.

Resetting Appliance. During reset the transmitter will drop the connection to the ECMS user

station. A second system message will appear that states: Connection to the Transmitter is lost.

You will be automatically returned to the Appliance Selection Menu screen.

NOTE: If the transmitter determines that the upgrade file is invalid, the transmitter cancels the upgrade and

maintains the previous firmware version. A message displays indicating that the upgrade has failed.

To Flash upgrade your ECMS user station using XMODEM:

NOTE: It is recommended that you flash upgrade the transmitter before you flash upgrade the ECMS user

station.

1. Download the ECMS user station upgrade file from Avocent.

2. Press Enter to display the serial menu.

3. Press 1 to access the Receiver Main Menu and press Enter. If the password option is enabled,

you will be prompted for a password.

4. Type the password and press Enter. The Receiver Main Menu will appear.

5. Press 5 to access the Firmware Management Menu and press Enter. The Firmware

Management Menu will appear.

Figure 3.26: Receiver Firmware Management Menu

6. Press 1 to select Receiver Flash upgrade via XMODEM and press Enter. The connection to the

transmitter will be dropped.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 91 92

Pas de commentaire

Avocent ECMS2000U Guide de l'utilisateur Page 53