Avocent Network Adapter EMS1000P Guide de l'utilisateur télécharger pdf (Page 31)

NOTE: Using the online help feature from the Avocent/Cyclades server is not always possible due to firewall configurations, nor is it

recommended. It is generally advisable for you to use the online help system provided with the product or download the online help

.zip file and run it from a local server.

The system administrator can download the online help from Avocent. For more information on downloading the

online help, contact Technical Support.

Once the online help file is obtained (in zip format), the files must be extracted and put in to a user-selected

directory under the web server’s root directory. The web server must be publicly accessible.

NOTE: The default URL for online help is http://global.avocent.com/us/olh/acs6000/v_2.2.0/en/index.html.

General

An administrator can configure a login banner to display when a user begins a SSHv2, Telnet, Console or web

manager session.

To create a login banner:

1. Click System - General in the side navigation bar.

2. Check the box to enable the login banner.

3. Enter the text you want displayed upon login in the Login Banner field and click Save.

Boot Configuration

Boot configuration defines the location from which the console server loads the operating system. The console

server can boot from its internal firmware or from the network. By default, the console server boots from Flash

memory. Clicking System- Boot Configuration will display the Boot Configuration screen.

If you need to boot from the network, make sure the following prerequisites are met:

• A TFTP or BootP server must be available on the network

• An upgraded console server boot image file must be downloaded from Avocent and made available on the

TFTP or BootP server

• The console server must be configured with a fixed IP address

• The boot filename and the IP address of the TFTP or BootP server is known

To configure boot configuration:

1. Click System - Boot Configuration.

2. Under Boot Mode, select From Flash, and select Image 1 or Image 2.

-or-

Select From Network and enter the following information:

• Appliance IP Address: Enter the fixed IP address or a DHCP assigned IP address to the console server.

• TFTP Server IP: Enter the IP address of the TFTP boot server.

• Filename: Enter the filename of the boot firmware.

Chapter 3: Accessing the Console Server via the Web Manager 23

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

Pas de commentaire

Avocent Network Adapter EMS1000P Guide de l'utilisateur Page 31