Avocent Network Adapter EMS1000P Guide de l'utilisateur télécharger pdf (Page 21)

To use Telnet to connect to a device through a serial port:

For this procedure, you need the username configured to access the serial port, the port name (for example, 14-

35-60-p-1), device name (for example, ttyS1), TCP port alias (for example, 7001) or IP port alias (for example,

100.0.0.100) and the hostname of the console server or its IP address.

To use a Telnet client, enter the information in the dialog boxes of the client.

-or-

To use Telnet in a shell, enter the following command:

# telnet [hostname | IP_address]

-or-

# telnet [hostname | IP_address] TCP_Port_Alias

-or-

# telnet IP_Port_Alias

To close a Telnet session:

Enter the Telnet hotkey defined for the client. The default is Ctrl ] + q to quit, or enter the text session hotkey

for the CLI prompt and then enter quit.

To use SSH to connect to a device through a serial port:

For this procedure, you need the username configured to access the serial port, the port name (for example, 14-

35-60-p-1), TCP port alias (for example, 7001), device name (for example, ttyS1), and the hostname of the

console server, IP address or IP Port alias (for example, 100.0.0.100).

To use an SSH client, enter the information in the dialog boxes of the client.

-or-

To use SSH in a shell, enter the following command:

ssh -l username:port_name [hostname | IP_address]

-or-

ssh -l username:device_name [hostname | IP_address]

-or-

ssh -l username:TCP_Port_Alias [hostname | IP_address]

-or-

ssh -l username IP_Port_Alias

Chapter 2: Installation 13

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 79 80

Pas de commentaire

Avocent Network Adapter EMS1000P Guide de l'utilisateur Page 21