Avocent PM3000 Guide de l'utilisateur télécharger pdf (Page 32)

4. Enter the power cycle interval (in seconds) and then use the drop-down menus to enable or

disable syslog, buzzer and SW overcurrent protection. These settings will apply to all

PDUs in a daisy-chained configuration.

5. To enable data logging, check the box next to Enable Data Logging.

6. Click Save.

Outlet Groups

By selecting the Outlet Groups tab, you can view status, outlet and power consumption for

outlet groups. You can also turn on, turn off or cycle selected outlet groups.

To add an outlet group:

1. Select Power Management - Outlet Groups. The Outlet Groups window appears.

2. Click Add. The Add Group window appears.

3. Enter the name of the Outlet Group in the Group Name field.

4. Click Save.

To manage outlet groups:

1. Select Power Management - Outlet Groups. The Outlet Groups window appears.

2. Check the box next to the name of the Outlet Group you want to manage.

3. Click Delete to remove the outlet group. Click On, Off or Cycle as desired.

NOTE: If the command fails for one outlet, the entire command is rejected so no outlets in the group will change.

To configure an outlet group:

1. Select Power Management - Outlet Groups. The Outlet Groups window appears.

2. Click the name of the outlet group you want to configure. The Outlet Group Details

window appears.

3. Click Add. The Outlet Settings window appears.

4. Click the radio button next to Select PDU to use a connected PDU. Enter the outlets to be

part of the group in the outlets field.

-or-

Click the radio button next to Custom and enter the PDU ID and outlets in the

appropriate fields.

5. Click Save.

24 Avocent PMPDU Installer/User Guide

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 116 117

Pas de commentaire

Avocent PM3000 Guide de l'utilisateur Page 32