Avocent PM3000 Guide de l'utilisateur télécharger pdf (Page 30)

Power Management

The following tabs are listed under Power Management in the Side Navigation Bar.

PDUs

To manage a PDU:

1. Select Power Management - PDUs.

2. Select the checkbox next to the PDU for which you want to manage power.

3. Click On, Off, Cycle, Reboot PDU, Reset HW Overcurrent Protection for Factory Defaults

if desired. A confirmation appears. Click OK.

NOTE: The power controls (On, Off and Cycle) will be applied to all outlets of the PDU.

4. To change the PDU ID, click Rename and enter the name in the New PDU ID field.

5. Click Save.

To view a PDU’s information:

1. Select Power Management - PDUs.

2. Click the name of the PDU you want to view or manage.

3. The Outlet Table with power controls window appears and the Side Navigation Bar

displays a list of options.

4. To manage outlets of PDU:

a. Check the box(es) of the outlet number(s) you want to manage.

b. Click On, Off, Cycle, Lock or Unlock to perform that function for the selected outlet(s).

5. Click Information in the Side Navigation Bar to view a PDU’s information.

6. Click Overview, Current, Voltage, Power Consumption, Cumulative Power or Environment

in the Side Navigation Bar to view a table with appropriate information.

7. To reset values, check the box next to the outlet you want to reset and click Reset Values

to clear Max, Min and Average values.

To manage outlets on a PDU:

1. Select Power Management - PDUs and click on the name of the PDU you want to manage.

2. Click Settings to expand the Side Navigation Bar.

3. Click Outlets.

22 Avocent PMPDU Installer/User Guide

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 116 117

Pas de commentaire

Avocent PM3000 Guide de l'utilisateur Page 30