Avocent PM 3000 Guide de l'utilisateur Page 31

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 108
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 30
Chapter 3: Accessing the PM PDU via the Web Manager 23
Help and Language
Click System - Help And Language and use the drop-down menu to select the PM PDU’s language.
Enter the full URL of the online help, ending in /index.html, on the local web server in the Online
Help URL field. Click Save.
Online help
When the online help feature is configured for your PM PDU, clicking the Help but
ton from any
form on the Web Manager opens a new window and redirects its content to the configured path for
the online help product documentation.
NOTE: Using the online help feature from the Avocent/Cyclades server is not always possible due to firewall
configurations, nor is it recommended. It is generally advisable for you to use the online help system provided
with the product or download the online help .zip file and run it from a local server.
The system administrator can download the online help from Avocent. For more information on
downloading the online help, contact Technical Support.
Once the online help file is obtained (in zip format), the files must be extracted and put in to a use
r-
selected directory under the web servers root directory. The web server must be publicly
accessible.
Boot Configuration
Boot configuration defines the location from which the PM PDU loads the operating system. The
PM PDU can boot from its internal firmware or from the network. By default, the PM PDU boots
from Flash memory. Clicking System- Boot Configuration will display the Boot Configuration
screen.
If you need to boot from the network, make sure the following prerequisites are met:
A TFTP or BootP server must be available on the network
An upgraded PM PDU boot image file must be downloaded from Avocent and made available
on the
TFTP or BootP server
The PM PDU must be configured w
ith a fixed IP address
The boot filename and the IP address of the TFTP o
r BootP server is known
To configure boot configuration:
1. Click System - Boot Configuration.
2.
Under Boot Mode, select From Flash, and select Im
age 1 or Image 2.
-or-
Select From Network and enter
the following information:
Appliance IP Address: Enter the fixed IP address or a DHCP assigned
IP address to the
PM PDU.
Vue de la page 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 107 108

Commentaires sur ces manuels

Pas de commentaire