Avocent KVM over IP switch Manuel d'utilisateur Page 45
- Page / 69
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
8/16 PS/2 KVM over IP switch
42
[confirm] <keycode>[+|-[*]<keycode>]*
“confirm” requests confirmation by a dialog box before the key strokes will be sent to the
remote host.
“keycode” is the key to be sent. Multiple key codes can be concatenated with a plus, or a
minus sign. The plus sign builds key combinations, all keys will be pressed until a minus
sign or the end of the combination is encountered. In this case all pressed keys will be
released in reversed sequence. So the minus sign builds single, separate key presses
and -releases. The star inserts a pause with duration of 100 milliseconds.
6.3.2 Keyboard/Mouse
Figure 6-17. Keyboard and Mouse Settings
Host Interface
Enables a certain interface the mouse is connected to. You can choose between “Auto”
for automatic detection, “USB” for an USB mouse, and “PS/2” for a PS/2 mouse.
Warning
To use the USB and/or PS/2 interface you need a correct cabling between the
managed host and the managing device. If the managed host has no USB
keyboard support in the BIOS and you have connected the USB cable only then
you will have no remote keyboard access during the boot process of the host. If
USB and PS/2 are both connected and you selected “ Auto ” as host interface,
then the card will select “ USB ” if available or otherwise falls back to “ PS/2 ”.
To get USB remote keyboard access during the boot process of the host, the following
conditions must be fulfilled:
• the host bios must have USB keyboard support
• the USB cable must be connected or must be selected in the Host interface option
- PS/2 KVM over IP SWITCH 1
- USER’S MANUAL 1
- TABLE OF CONTENTS 2
- 2. Introduction 7
- 8/16 PS/2 KVM over IP switch 10
- 11
- 3. Hardware installation 13
- 4. Configuration 17
- 5. Usage 22
- Figure 5-5. Remote Console 31
- 6. Menu Options 39
- 6.2 User Management 41
- 6.3 KVM Settings 42
- 6.4 Device Settings 47
- Figure 6-20. Dynamic DNS 49
- Common name 53
- Figure 6-25. Serial Port 54
- Figure 6-27. Date and Time 56
- Figure 6-29. Event Log 57
- 6.5 Maintenance 59
- Figure 6-34. Unit Reset 62
- 7. Troubleshooting 63
- 8. Certificates 64
- A. Pin Assignments 65
- Single port PS/2 KVM over IP 66
- B. Key Codes 67
- Table B.1: Key Names 68
- C. Video Modes 69
Produits connexes et manuels pour Commutateurs KVM Avocent KVM over IP switch
(62 pages)
(2 pages)
(2 pages)Magnadyne Sécurité manuels d'utilisation
La liste de Magnadyne Sécurité produits contient 3 manuels d'utilisation pour les modèles 3. Tous les guides d'utilisation en format pdf peuvent être téléchargés ou consultés en ligne.
Commentaires sur ces manuels