Avocent KVM over IP switch Manuel d'utilisateur télécharger pdf (Page 14)

8/16 PS/2 KVM over IP switch

Step 3 (Local console)

Connect the monitor to the KVM Switch. Using the attached cable, or the one included with your

monitor, connect it to the HDDB15-pin female port on the back of the KVM unit labeled with the

monitor symbol at the CONSOLE connector.

Step 4

Connect the keyboard to the KVM Switch. If you have an AT type keyboard, you will need an AT to

PS/2 adapter.

Step 5

Connect the mouse to the KVM Switch.

Step 6

Each PC port connector is HDDB15-pin type. Locate your input cable. It will have an HDDB15-pin

male connector at one end. Plug it into any label computer port on the rear of KVM switch unit. The

other end of input cable will have three connectors: a HDDB15-pin male type for PC video, a Mini Din

6 pin female type for keyboard and a Mini Din 6 pin female type for mouse. To plug these three

connectors into the respective ports of computer. Repeat the same procedure to all of PCs.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 68 69

Pas de commentaire

Avocent KVM over IP switch Manuel d'utilisateur Page 14