Avocent 1000R Manuel d'utilisateur télécharger pdf (Page 20)

14 AutoView 1000R/ AutoView 2000R Installer/User Guide

To connect an AVRIQ module to each server:

1. Locate the AVRIQ modules for your AutoView 1000R/2000R appliance.

2. Attach the appropriately color-coded ends to the keyboard (violet),

monitor (blue) and mouse (green) ports on the ﬁ rst server you will be

connecting to the appliance.

3. Attach one end of the CAT 5 cabling that will run between your AVRIQ and

AutoView 1000R/2000R appliance to the RJ-45 connector on the

AVRIQ module.

4. Connect the other end of the CAT 5 cable to the desired ARI port on the

back of your AutoView 1000R/2000R appliance.

5. Repeat steps 2-4 for all servers you wish to attach.

NOTE: When connecting a Sun AVRIQ module, you must use a multi-sync monitor to

accommodate Sun computers that support both VGA and sync-on-green or composite sync.

See Appendix B for more information on the AVRIQ-SRL module.

To connect serial devices to the AutoView 1000R/2000R appliance:

1. Locate an AVRIQ-SRL module.

2. Attach the AVRIQ-SRL 9-pin serial connector to the serial port of the

device to be connected to your AutoView 1000R/2000R appliance.

3. Attach one end of the CAT 5 cable to the RJ-45 connector on the AVRIQ-

SRL module. Connect the other end of the CAT 5 cable to the desired ARI

port on the back of your AutoView 1000R/2000R appliance.

NOTE: The AVRIQ-SRL module is a DCE device and only supports VT100 terminal emulation.

4. Connect the power supply to the power connector on your AVRIQ-SRL.

The cable expander can be used to power up to four AVRIQ-SRL modules

from a single power supply.

5. Connect the AVRIQ-SRL power supply to an appropriate AC wall outlet.

Power up your serial device.

To connect an AVRIQ-PEM:

1. Locate the AVRIQ-PEM module.

2. Attach one end of a CAT 5 cable to the IN port on the AVRIQ-PEM module.

3. Connect the other end of the CAT 5 cable to the desired ARI port on the

back of your AutoView 1000R/2000R appliance.

4. Attach one end of another CAT 5 cable to one of the eight ports on the

AVRIQ-PEM module.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 71 72

Pas de commentaire

Avocent 1000R Manuel d'utilisateur Page 20