Avocent MERGEPOINT SP MANAGER Guide de l'utilisateur télécharger pdf (Page 68)

56 MergePoint 5224/5240 Service Processor Manager User Guide

Viewing IPDU information

When a regular user or administrative user selects Access - IPDU - View IPDU Info, the View

IPDU Info screen appears.

Figure 3.18: View IPDU Info Screen

The following table shows the information displayed on the View IPDU Info screen for each IPDU.

You can view the following information underneath the name of each IPDU (under

Unit Information).

Table 3.3: Information on the View IPDU Info Screen

Field Description

Name Administrator

-configured name or the default (s1), which is assigned to the

AUX port.

Number of units The number of IPDUs connected to the port. The first IPDU is referred to as the

master. Any other IPDUs daisy

-chained off the first IPDU are referred to as slaves.

Number of outlets Total number of outlets on all connected IPDUs.

Buzzer Whether a buzzer has been configured to sound when a specified alarm threshold

is exceeded.

Syslog Whether syslogging has been configured for messages from this IPDU.

Over current protection Whether over current protection is enabled (to prevent outlets from being turned on

if the current on the IPDU exceeds the specified threshold).

Table 3.4: IPDU Information Under Unit Information

Field Description

Model IPDU model number

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 87 88

Pas de commentaire

Avocent MERGEPOINT SP MANAGER Guide de l'utilisateur Page 68