Avocent ESP Multi-Interface Serial Hub SuperSerial Guide d'installation télécharger pdf (Page 11)

9 Equinox ESP-2 MI Serial Hub Installation Guide

• Replace an ESP unit on a local or remote subnet

See the online help in the ESP Installation Wizard for more information.

OpenServer

The following sections contain procedures for installing the ESP driver on an Open Server

release 5.0.5a or higher system.

Installing Directly from CD-ROM

1. Mount the CD-ROM volume using the following command:

mount -f ISO9660,filemode=444 <device> <mount_point>

For example, the following command mounts a CD-ROM on drive 1 to /mnt:

mount -f ISO9660,filemode=444 /dev/cd1 /mnt

2. Install the driver using the “custom” utility with media image VOL.000.000.

3. When custom prompts for Media Device, select Media Images.

4. When custom prompts for Image Directory, specify:

/mnt/DRIVERS/ESP/SCO

5. Follow the instructions for custom contained in the ﬁ le:

/mnt/DRIVERS/ESP/SCO/README.

Creating OpenServer ESP Installation Diskettes on OpenServer

1. Be sure the mkdev cdrom command has been run.

2. Mount the CD-ROM volume using the following command:

mount -f ISO9660,lower <device> <mount_point>

For example, the following command mounts a CD-ROM on drive 0 to /mnt:

mount -f ISO9660,lower /dev/cd0 /mnt

3. Run the following commands:

cd /mnt [or other mount point]

./makeunix.sh

4. Follow the on-screen instructions to build an installation diskette for OpenServer ESP.

5. Once the OpenServer installation diskette is created, refer to the following ﬁ le for detailed

installation instructions:

/drivers/esp/sco/readme.txt

Creating OpenServer ESP Installation Diskettes on DOS

1. Load the Equinox SuperSerial Software CD into your CD-ROM drive.

2. Set your default drive to the CD-ROM drive letter.

3. Run the command

MAKEUNIX and select the appropriate Equinox product and operating

system for which diskettes are needed.

4. Once the OpenServer installation diskette is created, refer to the following ﬁ le for detailed

installation instructions:

/drivers/esp/sco/readme.txt

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Pas de commentaire

Avocent ESP Multi-Interface Serial Hub SuperSerial Guide d'installation Page 11