Avocent Advanced Console Server ACS 6000 Guide de l'utilisateur télécharger pdf (Page 49)

Chapter 3: Accessing the ACS 6000 Console Server via the Web Manager 37

5. Click Save.

Table 3.7: Power Parameters

Parameter Description

Physical

Enable Cisco RJ-45

Pin-Out

Defines the serial port pinout. Default setting: Disabled.

Status Defines the status of the serial port as either enabled or disabled.

Default: Disabled.

Speed Defines the speed as 300, 1200, 2400, 4800, 9600, 19200, 38400,

57600 or 115200. Default: 9600.

Parity Defines the parity as either Even, Odd or None. Default: None.

Data Bits Defines the data bits as either 5, 6, 7 or 8. Default: 8.

Stop Bits Defines the stop bits as either 1 or 2. Default: 1.

Flow Control Defines the flow control as none, hardware, software, RxON software

or TxON sofware. Default: None.

Power

PDU Type Defines the type or vendor of the PDU connected to the serial port.

• Auto - the vendor will be detected.

• Avocent-Cyclades - Avocent-Cyclades PM PDU family.

• SPC - SPC power control device family.

• Server Tech - Server Tech family.

Default: Auto.

Enable Speed Auto

Detection

When enabled, detects the speed of the port. Default: Disabled.

Pooling Rate The interval in seconds to update information from the PDU. Default:

20.

For Avocent/Cyclades

PDUs

Power Cycle Interval The interval in seconds between Off and On actions for the power

cycle command. Default: 15.

Syslog When enabled, the PDU will send syslog messages to the appliance.

Default: Enabled.

Buzzer Enables or disables the PDU’s buzzer. Default: Enabled.

SW Overcurrent

Protection

When enabled, the software’s overcurrent protection is on. Default:

Disabled.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 95 96

Pas de commentaire

Avocent Advanced Console Server ACS 6000 Guide de l'utilisateur Page 49